完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
嗨,我正在使用IHM07M1电机控制板,我在计算板载电路的相电流时遇到了问题。据我所知,增益为1.5583,偏移为1.5277V。
有人可以帮助验证这些值以及如何在软件中转换为放大器。 先谢谢了 以上来自于谷歌翻译 以下为原文 Hi, I am using the IHM07M1 motor control board and am have a issue on calculating the phase currents from the on board circuit. From what I can tell is the gain is 1.5583 and the offset is 1.5277V. Can someone help in verifying these values and on how to convert to amps in the software. Thanks in advanced |
|
相关推荐
1个回答
|
|
嗨,
增益为1.528,偏移电压为1.56 V. 您还可以使用MC Workbech来计算它:Power Stage - >电流感应 - >计算按钮 以上来自于谷歌翻译 以下为原文 Hi, The gain is 1.528 and the offset voltage is 1.56 V. You can also use the the MC Workbech to calculate it: Power Stage --> Current Sensing --> Calculate button |
|
|
|
只有小组成员才能发言,加入小组>>
请教:在使用UDE STK时,单片机使用SPC560D30L1,在配置文件怎么设置或选择?里面只有SPC560D40的选项
1408 浏览 1 评论
2058 浏览 1 评论
请问是否有通过UART连接的两个微处理器之间实现双向值交换的方法?
1507 浏览 1 评论
2803 浏览 6 评论
5186 浏览 21 评论
351浏览 4评论
503浏览 4评论
在Linux上安装Atollic TRUEStudio的步骤有哪些呢?
276浏览 3评论
使用DMA激活某些外设会以导致外设无法工作的方式生成代码是怎么回事
552浏览 3评论
479浏览 3评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-4-19 20:17 , Processed in 0.985202 second(s), Total 67, Slave 58 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号