完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
你好。
我有一个普通的8672A发电机。 它尚未配备支持86720A频率扩展单元(又名8672A-K22)? 有谁知道需要做哪些更改才能让这个生成器支持这个? 我知道必须创建一些控制线路,但还有其他什么? 我在安捷伦论坛上做了一些搜索。 我还问过雅虎集团没有运气。 我已经读过有一个改装套件11731A或11732A可以使8672A适应FEU。 任何人都有关于这个改装套件的信息? 感谢Eugene W2HX 以上来自于谷歌翻译 以下为原文 Hi there. I have a plain 8672A generator. It has not been outfitted to support the 86720A Frequency Extension Unit (aka 8672A-K22)?. Does anyone know what changes need to be made to have this generator support this? I know some control wiring has to be created, but anything else? I did some searching on the Agilent forums. I have also asked on the yahoo groups with no luck. I have read that there was a retrofit kit 11731A or 11732A that could adapt an 8672A for use with the FEU. Anyone have information on this retrofit kits? thanks Eugene W2HX |
|
相关推荐
1个回答
|
|
您将需要H34选项的信息。
这基本上将RF衰减器从主盒移出到扩展盒。 后部的连接器连接到底盒。 从主机到扩展箱的射频硬线。 以上来自于谷歌翻译 以下为原文 You will need the information for the H34 option. This basically moved the RF attenuator out of the main box to the extension box. The connector in the rear was linked to the bottom box. RF hard line from main unit to extender box. |
|
|
|
只有小组成员才能发言,加入小组>>
2082 浏览 1 评论
1846 浏览 1 评论
1700 浏览 5 评论
2563 浏览 3 评论
将设备连接到PC并通过asic格式读取数据然后我的网络分析仪挂起
1547 浏览 4 评论
关于Keysight x1149 Boundary Scan Analyzer
350浏览 0评论
1386浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
262浏览 0评论
2248浏览 0评论
1103浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-3-29 18:19 , Processed in 1.023551 second(s), Total 73, Slave 57 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 深圳华秋电子有限公司
电子发烧友 (电路图) 粤公网安备 44030402000349 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号