[接口]

通过RS-485总线进行半双工通信设计方案

2018-12-24 15:52:40 2310 RS-485 总线

0 描述 The tiDA-01090 reference design enables half-duplex communication over an RS-485 bus without requiring additional driver-enable/receiver-enable controls. The design allows for the transceiver used on each node to go into transmit mode automatically when data is being transmitted from a local (...) 主要特色 Automatically enables an RS-485 driver when data is output from an MCU or UART Transitions RS-485 transceiver into receive mode when data is not being transmitted Works with any RS-485 transceiver Low-cost due to minimal number of components Adjustable data frame length via passive component selection 0 Schematic/Block Diagram.pdf 54.05 KB , 下载次数: 8 物料清单.pdf 96.07 KB , 下载次数: 6 层图（或 PCB 布局）.pdf 421.9 KB , 下载次数: 4 组装图.pdf 70.98 KB , 下载次数: 1 CAD 文件.zip 298.91 KB , 下载次数: 0 光绘文件.zip 1 Bytes , 下载次数: 0
举报淘帖0 只看该作者最近下载过的用户(6) 相关推荐 • 国产自动方向控制、半双工 RS-485 收发器：MS2548 替代MAX13487 2996 • 防止RS-485总线出现致命瞬态波形的参考设计 717 • RS-485通信相关资料分享 966 • 怎么实现RS-485数据速率独立型半双工中继器的设计？ 1112 • RS-485自动收发电路应用异常的解决办法 2716 • 面向楼宇管理系统的半双工非隔离式RS-485 BoosterPack 1758 • 防止RS-485出现IEC ESD、EFT和浪涌的参考设计包括层图及原理图 3277 • RS-485 IEC ESD参考设计包括BOM及原理图 2366 • 半双工非隔离式 RS-485 BoosterPack 参考设计 2277 • 采用ADM2582E/ADM2587E实现完全半/全双工的RS-485/RS-422接口隔离 15268