完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
您好,我正在模拟具有4端口的原理图的频率s参数。
我的原理图中有两个独立的2端口网络。 在数据显示中,我想使用方程式从4端口仿真结果构建2端口s参数矩阵。 我多年前就能做到这一点,但我已经忘记了如何这样做的语法。 有人可以推荐最好的方法吗? 谢谢! 布赖恩 以上来自于谷歌翻译 以下为原文 Hello, I am simulating s-parameters across frequency for a schematic that has 4-ports. I had two separate 2-port networks in my schematic. In the data display, I would like to construct 2-port s-parameter matrix from the 4-port simulation results using equations. I was able to do this years ago, but I have since forgotten the syntax on how to do so. Could anybody recommend the best way to do this? Thanks! Brian |
|
相关推荐
1个回答
|
|
没关系,我明白了。
Sparam = {{S11,S12},{S21,S22}} 以上来自于谷歌翻译 以下为原文 Nevermind, I figured it out. Sparam={{S11, S12}, {S21, S22}} |
|
|
|
只有小组成员才能发言,加入小组>>
2091 浏览 1 评论
1850 浏览 1 评论
1707 浏览 5 评论
2577 浏览 3 评论
将设备连接到PC并通过asic格式读取数据然后我的网络分析仪挂起
1558 浏览 4 评论
497浏览 1评论
关于Keysight x1149 Boundary Scan Analyzer
355浏览 0评论
1405浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
268浏览 0评论
2254浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-4-19 20:59 , Processed in 1.596463 second(s), Total 69, Slave 58 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号