完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
我们希望使用2X技术以使用AFR应用程序获得更高的准确性。
thru需要齐平吗? 通过多长时间? 以上来自于谷歌翻译 以下为原文 We would like to use the 2X technique for greater accuracy using the AFR application. Does the thru need to be flush? How much length can the thru have? |
|
相关推荐
1个回答
|
|
直通不需要为零长度。
从理论上讲,没有限制,但在实践中,我认为我推荐的最大几英寸。 通常,直通与DUT的长度相似。 在AFR中,有一个条目用于输入通过长度的值或使用打开或短路或DUT作为自我确定通过长度的参考。 以上来自于谷歌翻译 以下为原文 The thru doesn't need to be zero length. In theory there is no limit, but in practice I would guess a few inches is most I'd recommend. Usually the thru is similar in length to the DUT. In AFR, there is an entry to enter the value of the thru length or use opens or shorts or the DUT as a reference to self-determine the thru length. |
|
|
|
只有小组成员才能发言,加入小组>>
2091 浏览 1 评论
1850 浏览 1 评论
1707 浏览 5 评论
2577 浏览 3 评论
将设备连接到PC并通过asic格式读取数据然后我的网络分析仪挂起
1558 浏览 4 评论
497浏览 1评论
关于Keysight x1149 Boundary Scan Analyzer
355浏览 0评论
1405浏览 0评论
N5230C用“CALC:MARK:BWID?”获取Bwid,Cent,Q,Loss失败,请问大佬们怎么解决呀
268浏览 0评论
2254浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-4-20 04:33 , Processed in 1.028455 second(s), Total 69, Slave 58 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号