WICED是否支持CYW4343W的蓝牙？

你好，蓝：
433W应使用434 38 A1固件进行编译。这是在平台文件夹中定义的。
你现在使用的是哪种EVB？



     以下为原文
  Hi  Lan:
 
     4343W should use 43438A1 firmware for the compile.    This is defined in the platforms folder.
and which evb you are using now ?

嗨，哲，
我使用CYW9433WWCD1EVB。



     以下为原文
  Hi zhez,
 
I use CYW94343WWCD1_EVB.

你好，蓝：
26M是CYW9433WWCD1EVB。



     以下为原文
  Hi Lan:
 
26M is  for CYW94343WWCD1_EVB .

嗨，哲，
我创建了一个名为“DEMO.DALALHFA2DPYCYW9433WWCD1EVB下载下载应用程序运行”
但是它没有建造。
你能告诉我如何解决吗？谢谢。
构建控制台消息如下：
14:21:05****构建项目43XXXW-Wi-Fi＊＊配置默认值
“C:\用户tMeNe\DeaStudio2.6\43XXXWi-Fi\Fu.exe”DEMO.DALALHHFA2DP-CYW9433WWCD1EVB下载下载应用程序运行
MaCeCMDaveMask= DeMo Duall HFYA2DP-CYW9433WWCD1EVB下载运行OTA2A支持的下载应用程序被禁用
首次制作配置文件
+------------------------------------------------+
重要注意事项
+------------------------------------------------+
Wi-Fi MAC地址
目标Wi-Fi MAC地址定义在WICED SDK＆GT；
确保每个目标设备具有唯一的地址。γ
+------------------------------------------------+
单片机与Wi-Fi节电
*使用WICE Posivabess API函数的应用连接精确的32 kHz
参考时钟到WLAN芯片的睡眠时钟输入引脚。请阅读WICED Powersave
如果你计划使用PoxSaveStices特性，请在文档目录中找到应用程序注释。γ
+------------------------------------------------+
+------------------------------------------------+
重要注意事项
+------------------------------------------------+
Wi-Fi MAC地址
目标Wi-Fi MAC地址定义在WICED SDK＆GT；
确保每个目标设备具有唯一的地址。γ
+------------------------------------------------+
单片机与Wi-Fi节电
*使用WICE Posivabess API函数的应用连接精确的32 kHz
参考时钟到WLAN芯片的睡眠时钟输入引脚。请阅读WICED Powersave
|应用笔记位于文件目录如果你计划使用省电功能。γ
----------------------------------------------------------------------------------------------------- + +
“嵌入式堆栈”
。/。/图书馆/司机/蓝牙/ wiced_hci_bt / wiced_hci_bt_src.mk
..
makefile makecmdgoals = demo.dual_hf_a2dp-cyw94343wwcd1_evb下载download_apps运行ota2_support禁用
构建引导加载程序
成品建筑引导装载机
使.exe [ 1 ]：***不规则使目标库/司机/蓝牙/固件/ 43438a1 / 26mhz / bt_firmware_embedded_headset。C，需要通过建立/演示。dual_hf_a2dp-cyw94343wwcd1_evb /模块/。/图书馆/司机/蓝牙/固件/ 43438a1 / 26mhz / bt_firmware_embedded_headset O”。停下来。
Ex.EXE（1）：***等待未完成的工作…
MaFixFiel: 351：目标“MeNIApp”失败的配方
使：***[MNIONAPP]错误2
14:21:08搭建完成（取3S.264MS）



     以下为原文
  Hi zhez,
 
I make a target named "demo.dual_hf_a2dp_CYW94343WWCD1_EVB download download_apps run"
But it fail to build.
Could you tell me how to solve. Thanks.
The build console message as following,
 
14:21:05 **** Build of configuration Default for project 43xxx_Wi-Fi ****
"C:\Users\tseming\Documents\WICED-Studio-6.2\43xxx_Wi-Fi\make.exe" demo.dual_hf_a2dp-CYW94343WWCD1_EVB download download_apps run
MAKEFILE MAKECMDGOALS=demo.dual_hf_a2dp-CYW94343WWCD1_EVB download download_apps run OTA2_SUPPORT is disabled
Making config file for first time
+-----------------------------------------------------------------------------------------------------+
| IMPORTANT NOTES                                                                                     |
+-----------------------------------------------------------------------------------------------------+
| Wi-Fi MAC Address                                                                                   |
|    The target Wi-Fi MAC address is defined in /generated_mac_address.txt                 |
|    Ensure each target device has a unique address.                                                  |
+-----------------------------------------------------------------------------------------------------+
| MCU & Wi-Fi Power Save                                                                              |
|    It is *critical* that applications using WICED Powersave API functions connect an accurate 32kHz |
|    reference clock to the sleep clock input pin of the WLAN chip. Please read the WICED Powersave   |
|    Application Note located in the documentation directory if you plan to use powersave features.   |
+-----------------------------------------------------------------------------------------------------+
+-----------------------------------------------------------------------------------------------------+
| IMPORTANT NOTES                                                                                     |
+-----------------------------------------------------------------------------------------------------+
| Wi-Fi MAC Address                                                                                   |
|    The target Wi-Fi MAC address is defined in /generated_mac_address.txt                 |
|    Ensure each target device has a unique address.                                                  |
+-----------------------------------------------------------------------------------------------------+
| MCU & Wi-Fi Power Save                                                                              |
|    It is *critical* that applications using WICED Powersave API functions connect an accurate 32kHz |
|    reference clock to the sleep clock input pin of the WLAN chip. Please read the WICED Powersave   |
|    Application Note located in the documentation directory if you plan to use powersave features.   |
+-----------------------------------------------------------------------------------------------------+
"Embedded Stack"
././libraries/drivers/bluetooth/wiced_hci_bt/wiced_hci_bt_src.mk
../wiced_hci_bt/
MAKEFILE MAKECMDGOALS=demo.dual_hf_a2dp-CYW94343WWCD1_EVB download download_apps run OTA2_SUPPORT is disabled
Building Bootloader
Finished Building Bootloader
 
 
make.exe[1]: *** No rule to make target 'libraries/drivers/bluetooth/firmware/43438A1/26MHz/bt_firmware_embedded_headset.c', needed by 'build/demo.dual_hf_a2dp-CYW94343WWCD1_EVB/Modules/./libraries/drivers/bluetooth/firmware/43438A1/26MHz/bt_firmware_embedded_headset.o'.  Stop.
make.exe[1]: *** Waiting for unfinished jobs....
Makefile:351: recipe for target 'main_app' failed
make: *** [main_app] Error 2
 
 
14:21:08 Build Finished (took 3s.264ms)

嗨，哲，
我发现在库驱动程序Bluetooth 固件4338 A126MHz中没有“BTyStimeSudioEndodEdgDeCuff.c”，但仅在库驱动程序蓝牙固件20706A2\
如何解决？



     以下为原文
  Hi zhez,
 
I found there is no "bt_firmware_embedded_headset.c" in librariesdriversbluetoothfirmware43438A126MHz, but only in librariesdriversbluetoothfirmware20706A2
 
How to solve it?

你好，蓝：
只有20706A2和43012将支持控制器/嵌入式模式，其余的BT芯片只支持控制器模式。
如果您使用的函数是434 3WWCD1，请在Auffic文件中禁用UsHeBTyEntPixType，编译错误是由于此定义。
实际上，这个功能不是默认的433W芯片支持，如果您有43907个EVB，请使用这个EVB进行功能验证，谢谢。



     以下为原文
  Hi  Lan:
 
   Only 20706A2 and 43012 will support both controller/embedded mode ,Rest of the BT chips support controller mode only.
and if you are using 4343WWCD1 for the function, please disable USE_BT_EMBED_MODE in the makefile,  your compile error is due to this define.
 
     Actually,  seems this function is not default supported with 4343W chip,   if you have 43907 evb,  please use this evb for the function verification,thanks.

嗨，呃，
感谢您的答复禁用AuthyBTyEngPixType模式。
我知道CYW9433WWCD1AEVB不支持缺省支持
现在我打算使用J7报头的外围SPI2（I2S2）连接外部DAC板，并尝试使平台支持音频功能。
CYW9433WWCD1EVB有可能吗？



     以下为原文
  Hi ehez,
 
Thanks for your reply to disable USE_BT_EMBED_MODE.
 
I know CYW94343WWCD1_EVB doesn't default support WICED_USE_AUDIO
Now I intend  to use peripheral SPI2 (I2S2) from J7 header to connect external DAC board, and try to make the platform supported audio function.
Is it possible for CYW94343WWCD1_EVB?