完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
你好,
我正在尝试使用Sensortile实现手势识别,开发我的固件我开始研究BlueMicrosystem2示例,因此我能够检测到简单的手势作为手腕的方向。 现在我想要认识一些更复杂的手势,比如在空中画一个字母或一个符号,这可能是实现这个的方法吗? 我知道open.mems库在代码中编码有限数量的手势,我可以识别自定义手势并映射它们吗? 我应该定期通过SensorTile对数据传感器进行采样并计算它们以重新识别手势吗?或Open.MEMS库可以帮助我进行此操作吗?最好的问候 托马索 https://community.st.com/tags♯/?tags=sensortile%20bluenrg-ms%20firmware “ #sensortile-bluenrg-MS-固件 以上来自于谷歌翻译 以下为原文 Hi at all, I am trying to implement gesture recognition with a SensorTile, to develope my firmware I started studying the BlueMicrosystem2 example, and so I was able to detect simple gestures as the wrist's orientation. Now I would like to recognize some gestures a few more complex, as draw a letter in the air or a symbol, what could be the way to implement this? I know that the open.mems library encodes a limited number of gesture in a code, as could I to recognize custom gestures and map them? Should I sample the data sensors by the SensorTile with regularity and compute them to recogize the gestures? or the Open.MEMS library can help me in this operation?Best Regards Tommaso https://community.st.com/tags♯/?tags=sensortile%20bluenrg-ms%20firmware ‌ #sensortile-bluenrg-ms-firmware |
|
相关推荐
1个回答
|
|
不幸的是,用于手势识别的库(MotionGR)不支持自定义手势。
您需要自己实现该功能。 以上来自于谷歌翻译 以下为原文 Unfortunately the library for gesture recognition (MotionGR) does not support custom gesture. You would need to implement the feature by yourself. |
|
|
|
只有小组成员才能发言,加入小组>>
请教:在使用UDE STK时,单片机使用SPC560D30L1,在配置文件怎么设置或选择?里面只有SPC560D40的选项
1209 浏览 1 评论
1832 浏览 1 评论
请问是否有通过UART连接的两个微处理器之间实现双向值交换的方法?
1498 浏览 1 评论
2724 浏览 6 评论
4945 浏览 21 评论
293浏览 4评论
338浏览 4评论
在Linux上安装Atollic TRUEStudio的步骤有哪些呢?
263浏览 3评论
使用DMA激活某些外设会以导致外设无法工作的方式生成代码是怎么回事
333浏览 3评论
346浏览 3评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-3-29 01:25 , Processed in 0.755363 second(s), Total 75, Slave 59 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 深圳华秋电子有限公司
电子发烧友 (电路图) 粤公网安备 44030402000349 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号