完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
扫一扫,分享给好友
本帖最后由 一只耳朵怪 于 2018-6-19 15:48 编辑
hyperterminal设置都是一样的:Bites per second:11500 Data bits:8bit Parity:None Stop bits:1 Flow control:None 编码格式我选择的UTF-8,然后是如下信息,进行不下去了,请问问题出在哪里? POST result: PASS IBL version: 1.0.0.16 IBL: PLL and DDR Initialization Complete IBL Result code 00 IBL: Booting from NOR platform_init Done Start BIOS 6 QMSS successfully initialized CPPI successfully initialized PA successfully initialized HUA version 2.00.00.04 Setting hostname to tidemo-102735 MAC Address: 00-17-EA-D1-43-43 Configuring DHCP client PASS successfully initialized Ethernet subsystem successfully initialized Ethernet eventId : 48 and vectId (Interrupt) : 7 Registration of the EMAC Successful, waiting for link up .. Service Status: DHCPC : Enabled : : 000 Service Status: THTTP : Enabled : : 000 Service Status: DHCPC : Enabled : Running : 000 Service Status: DHCPC : Enabled : Fault : 002 Service Status: DHCPC : Disabled : : 000 Service Status: DHCPC : Enabled : : 000 Service Status: DHCPC : Enabled : Running : 000 Service Status: DHCPC : Enabled : Fault : 002 Service Status: DHCPC : Disabled : : 000 Service Status: DHCPC : Enabled : : 000 Service Status: DHCPC : Enabled : Running : 000 Service Status: DHCPC : Enabled : Fault : 002 Service Status: DHCPC : Disabled : : 000 Service Status: DHCPC : Enabled : : 000 Service Status: DHCPC : Enabled : Running : 000 POST result: PASS IBL version: 1.0.0.16 IBL: PLL and DDR Initialization Complete IBL Result code 00 IBL: Booting from NOR platform_init Done Start BIOS 6 QMSS successfully initialized CPPI successfully initialized PA successfully initialized HUA version 2.00.00.04 Setting hostname to tidemo-102735 MAC Address: 00-17-EA-D1-43-43 Configuring DHCP client PASS successfully initialized Ethernet subsystem successfully initialized Ethernet eventId : 48 and vectId (Interrupt) : 7 Registration of the EMAC Successful, waiting for link up .. Service Status: DHCPC : Enabled : : 000 Service Status: THTTP : Enabled : : 000 Service Status: DHCPC : Enabled : Running : 000 Service Status: DHCPC : Enabled : Fault : 002 Service Status: DHCPC : Disabled : : 000 Service Status: DHCPC : Enabled : : 000 Service Status: DHCPC : Enabled : Running : 000 Service Status: DHCPC : Enabled : Fault : 002 Service Status: DHCPC : Disabled : : 000 Service Status: DHCPC : Enabled : : 000 Service Status: DHCPC : Enabled : Running : 000 Service Status: DHCPC : Enabled : Fault : 002 Service Status: DHCPC : Disabled : : 000 Service Status: DHCPC : Enabled : : 000 Service Status: DHCPC : Enabled : Running : 000 |
|
相关推荐
2个回答
|
|
已经解决了,单机要装DHCP server 软件,而且最好用TI工程师提供的SERVER软件:http://www.deyisupport.com/question_answer/dsp_arm/c6000_multicore/f/53/p/18616/61914.aspx
下载这里的软件,再运行就没问题了 |
|
|
|
参考
http://www.deyisupport.com/question_answer/dsp_arm/c6000_multicore/f/53/p/18616/61979.aspx#61979 http://processors.wiki.ti.com/index.php/BIOS_MCSDK_2.0_User_Guide?keyMatch=EVM6678 out of box test&tisearch=Search-EN#Power_On_Self_Test_.28POST.29 |
|
|
|
只有小组成员才能发言,加入小组>>
TMS320F28377D:新做了以377d为芯片的板子,上电后芯片复位引脚出现方波请问如何解决?
1871 浏览 0 评论
TPS55340通电后输入端保险丝烧断,芯片输入和GND之间短路
3613 浏览 4 评论
5019 浏览 0 评论
请问如何用DM368对RGB格式的图片数据进行编码生成JPEG格式图片?
1725 浏览 1 评论
9309 浏览 8 评论
CC3100BOOST使用CC3200lunchXL进行烧录
653浏览 2评论
694浏览 1评论
TMS320F28034: 利用C2prog通过SCI给TMS320F28034烧录程序,出现错误提示:Bootloading... failed (invalid echo)!
651浏览 1评论
1178浏览 1评论
求DLPC350 Programmer’s Guide User's Guide 中文版说明书
1174浏览 1评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-3-28 19:11 , Processed in 0.755869 second(s), Total 77, Slave 61 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 深圳华秋电子有限公司
电子发烧友 (电路图) 粤公网安备 44030402000349 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号