[讨论]

基于msp430g2553模拟IIC程序

2013-7-9 20:00:47 5410

0 ////***重庆三峡学院电子与信息工程学院创新实验室唐老鸭*//// #ifndef _IIC_H_ #define _IIC_H_ #include "msp430g2553.h" //***************宏定义**************** #define uchar unsigned char #define uint unsigned int #define SDA_OUT P1DIR\|=BIT3 #define SDA_IN P1DIR&=~BIT3 #define SDA_H P1OUT\|=BIT3 #define SDA_L P1OUT&=~BIT3 #define SCL_OUT P1DIR\|=BIT2 #define SCL_IN P1DIR&=~BIT2 #define SCL_H P1OUT\|=BIT2 #define SCL_L P1OUT&=~BIT2 //8M晶振时大约20us延时程序 void delayus(uint z) { uint i,j; for(i = 0;i<20;i++) for(j=0;j {;;}; } // 开始位 void start() { SDA_OUT; SCL_OUT; SDA_H; SCL_H; delayus(1); //20 SDA_L; delayus(2);//40 SCL_L; } // 停止位 void stop() { SDA_OUT; SCL_OUT; SDA_L; delayus(1);//20 SCL_H; delayus(1); SDA_H; } // 从AT24Cxx移入数据到MCU uchar shin() { uchar i,read_data; SDA_OUT; SCL_OUT; for(i = 0; i < 8; i++) { SDA_H; delayus(1); SCL_H; SDA_IN; read_data <<= 1; if(P1IN&BIT3) read_data\|=0x01; SDA_OUT; SCL_L; } return(read_data); } // 从MCU移出数据到AT24Cxx uchar shout(uint write_data) { uchar i; uchar ack_bit; SDA_OUT; SCL_OUT; for(i = 0; i < 8; i++) // 循环移入8个位 { if(write_data&0x80) SDA_H; else SDA_L; delayus(1);//2 SCL_H; delayus(1);//2 SCL_L; delayus(1);//2 write_data <<= 1; } SDA_H; // 读取应答 delayus(1); SCL_H; //注意拉高 delayus(1); SDA_IN; if(P1IN&BIT3) ack_bit=1; else ack_bit=0; SCL_L; return ack_bit; // 返回AT24Cxx应答位 } #endif 0
2013-7-9 20:00:47　　评论淘帖0 举报相关推荐 • 基于msp430g2553延时程序 6555 • MSP430G2553 1442 • Msp430g2553的小综合程序 3213 • 怎么编写msp430g2553的IIC驱动？ 84 • msp430G2553 27197 • MSP430G2553 2204 • msp430g2553 2875 • msp430g2553 1791 • 如何用MSP430G2553软件实现IIC 1605 • msp430g2553适合新手学的小程序 22 2 个讨论