完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
柏队,我需要一些建议,我有一个012011通过SPI连接到一个4024,我都在同一条总线上其他SPI器件和他们工作的很好,没有问题。我什么也没得到,但腐败的数据很不一致的最好的,我已经试过各种可能的情况(中值滤波器,自由运行时钟,晚味噌,不同的数据采样率)并没有什么区别,请看这里的数据和建议我如果我错过了一些东西。附件是我的项目,无论是主人和奴隶,我的引脚分配屏幕截图,SPI的对话框和原理图,我得到这个工作,
XT8S.BangLe01 073018.Zip 3.6兆字节 以上来自于百度翻译 以下为原文 Cypress team, I need some advice, I have a 012011 connected to a 4024 via SPI, I have other SPI devices on the same bus and they work fine, no issues. I get nothing but corrupt data, very inconsistent at best, I have tried every possible scenario (median filters, free running clocks, late MISO, different over sampling and data rates) and nothing makes a difference, please look the data here and advise me if I have missed some thing. Attached is my project, both master and slave, screen shots of my pin assignments, SPI dialog boxes and schematics, I have to get this working,
|
|
相关推荐
1个回答
|
|
我得到了工作,而不得不跳过许多问题,什么固定它是有一个虚拟的读/写词,被丢弃。得到的是坚实的。我怀疑,事实上,从运行在国际劳工组织,是真正的罪魁祸首。在产品设计中我们将添加一个水晶手表看不完善的东西。
还有许多其他的尝试,骑自行车从SPI和关闭之间的转移也有帮助。 以上来自于百度翻译 以下为原文 I got it working, but had to jump through many issues, what fixed it was having a dummy READ/WRITE word that is discarded. That got is solid. I suspect the fact that the slave is running on the ILO only, is the real culprit. On the production design we will add a watch crystal and see if that does not improve things. There were many other ideas to try, cycling the slave SPI on and off between transfers also helped. |
|
|
|
只有小组成员才能发言,加入小组>>
713个成员聚集在这个小组
加入小组1888 浏览 1 评论
1639 浏览 1 评论
3393 浏览 1 评论
请问可以直接使用来自FX2LP固件的端点向主机FIFO写入数据吗?
1556 浏览 6 评论
1371 浏览 1 评论
CX3连接Camera修改分辨率之后,播放器无法播出camera的画面怎么解决?
170浏览 2评论
170浏览 2评论
使用stm32+cyw43438 wifi驱动whd,WHD驱动固件加载失败的原因?
304浏览 2评论
325浏览 1评论
45浏览 1评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2024-3-29 22:26 , Processed in 0.681729 second(s), Total 75, Slave 59 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 深圳华秋电子有限公司
电子发烧友 (电路图) 粤公网安备 44030402000349 号 电信与信息服务业务经营许可证:合字B2-20210191 工商网监 湘ICP备2023018690号